KSRY14G JIS Y-strainer

KSRY14G JIS Y-strainer
KSRY14G JIS Y-strainer KSRY14G JIS Y-strainer KSRY14G JIS Y-strainer KSRY14G JIS Y-strainer
category JIS
product
serial number
20
product JIS Y-strainer
product 2 JIS Y-filter
model KSRY14G-5K
Connection standard JIS
design standards SH/T3411
The main material SCPH2
Flange hole size JIS/B2220
Nominal diameter (MM) DN20-DN150
Nominal pressure (MPA) 5K-40K
Filter element body 304
Gasket graphite
Flange sealing surface (RF)/ (FF) /(FM) / (M)
Connection Type FLANGE
Applicable medium water、oil
Design temperature -29~+350℃
Product Introduction Product Introduction
The KSRY14G JIS strainer is an indispensable device in the pipeline system. The structure and flange holes standard are according to JIS. It is usually installed at the inlet end of the equipment to filter particulate impurities in the medium and protect the valves or other equipment. kmo's products have the characteristics of advanced structure, low resistance, and convenient drainage. The connection way are flange connection and thread screw connection. The applicable medium of the product is water, oil, gas and corrosive medium. (oxygen is separate) The filter can be made according to user’s requirements. The internal parts are made of stainless steel, which is durable. The mesh of the filter can be set according to customer needs. Generally speaking, the mesh of water strainer is 18~30 meshes. The mesh of the gas strainer is 40~700 meshes, and the mesh of the oil strainer is 100~480 meshes.

Feedback

Indicative Seals Outdoor Load Break Switch Distribution Box BGJT(X) Hard Drawn Copper Stranded Wires Copper Stranded Connectors With Ferrules Sanitary Strainer & Filter Sanitary Clamp Sanitary Ball Valve HD, HDD, HEAV HK insert series Fuel Pump Sanitary Single-Screw Pump Pinch Valve 卫生离心泵 卫生离心泵 Solid State Relay (SSR) Padlock seal DC24V Constant Voltage Emergency Kit stainless steel elbow Auto Relays 直流接触器 High Voltage Switchgear Sanitary Valve